When Santa Cruz introduced Bronson, it took the market by storm, redefining what people expected from a 150mm trail bike.
Equally at home in the Trans-Provence as it was on The Ridge, updating and improving it was going to be no small feat.
The most visible upgrade is the completely new VPP® link arrangement. The lower link tucks neatly above the bottom bracket, fully-recessed and protected from impacts. Meanwhile the box-section upper link now mounts cleanly to the top- tube and enhances lateral stiffness as a result.
Shock rate’s been in refined in the process too, delivering greater small bump sensitivity and a more progressive mid-stroke.
Geometry has also evolved subtly to meet demand from riders for a bike of this ilk. The seat tube angle’s been steepened, placing the rider right above the cranks and perfectly in position to lay down the power. Meanwhile a one-degree slacker 66 degree head tube angle combines with a 20-25mm longer top tube and shorter chainstay length to create an evermore rally-ready geometry than its predecessor.
This CC-level carbon frame is every bit as stiff and strong as our C-level frame, but weighs about 280 grams less, due to the use of some lighter, stronger, and more expensive carbon fiber. Using this material in key places allowed us to use less material overall, which is what shaves off more than half a pound from the frame.
FRAME FEATURES
-
148mm Rear Axle Spacing
-
Full carbon frame and swingarm
-
150mm (6") VPP™ suspension
-
27.5" wheels
-
Double sealed pivots for long bearing life
-
Full carbon dropouts and disk mounts
-
Angular contact bearings maximize stiffness
-
Collet axle pivots lock in place without pinch bolts
-
Bottle cage mount within front triangle fits piggyback shocks
-
Molded rubber swingarm and downtube protection
-
Stealth and external seatpost cable routing
-
Threaded Bottom Bracket
-
ISCG-05 tabs for chainguide compatibility
-
Direct mount rear derailleur option